Buy Now!
New Tie Rod from 1AAuto.com [ Ссылка ]
This video shows you how to replace the inner tie rods on your 2007-2018 Jeep Wrangler. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.
This repair was done on a 2015 Jeep Wrangler Unlimited Sport 3.6L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2007 Jeep Wrangler
2008 Jeep Wrangler
2009 Jeep Wrangler
2010 Jeep Wrangler
2011 Jeep Wrangler
2012 Jeep Wrangler
2013 Jeep Wrangler
2014 Jeep Wrangler
2015 Jeep Wrangler
2016 Jeep Wrangler
2017 Jeep Wrangler
Tools you will need:
• Pry Bar [ Ссылка ]
• 10mm Wrench [ Ссылка ]
• 15mm Socket [ Ссылка ]
• 21mm Socket
• Pickle Fork
• Trim Tool Set [ Ссылка ]
• Large Locking Pliers
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Copper Anti-Seize
• Paper Towels [ Ссылка ]
• Rust Penetrant
• Hammer
• Large Hammer
Subscribe: [ Ссылка ]
Check out our playlist:
Jeep Wrangler 2007-2017 3rd Generation JK: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
