Buy Now!
New Exhaust Manifold Catalytic Converter Assembly from 1AAuto.com [ Ссылка ]
Some vehicles combine the catalytic converter and exhaust manifold into a single unit. If you need to replace the catalytic converter or exhaust manifold on your Toyota RAV4, then you will replace the entire assembly. This video shows you how to install a new exhaust manifold and catalytic converter assembly on your 2006-2012 Toyota RAV4.
• Check here for more videos on the 2006-12 Toyota RAV4: [ Ссылка ]
This repair was done on a 2006 Toyota Rav4 Limited 2.4L and the process should be similar on the following vehicles:
2006 Toyota Rav4
2007 Toyota Rav4
2008 Toyota Rav4
2009 Toyota Rav4
2010 Toyota Rav4
2011 Toyota Rav4
2012 Toyota Rav4
Tools you will need:
• 10mm Wrench [ Ссылка ]
• 12mm Wrench [ Ссылка ]
• 14mm Wrench [ Ссылка ]
• 22mm Wrench
• 10mm Socket [ Ссылка ]
• 12mm Socket [ Ссылка ]
• 14mm Socket [ Ссылка ]
• Locking Pliers [ Ссылка ]
• Push Pin Pliers
• Side Cutters
• Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Copper Anti-Seize
• Rust Penetrant
• Hammer
• Magnet - Extendable
• Pick [ Ссылка ]
• Razor Blade / Gasket Scraper
• Sanding Block
Subscribe: [ Ссылка ]
Check out our playlist:
Toyota RAV4 2006-12 3rd Gen: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
