Loads consisting of any heating element are classified as resistive loads. These include incandescent lights, toasters, ovens, space heaters and coffee makers. A load that draws current in a sinusoidal waxing-and-waning pattern in concert with a sinusoidal variation in voltage – that is, the maximum, minimum and zero points of the voltage and current values over time line up – is a purely resistive one and includes no other elements.
Features
Standard 20 amp transfer relay will pass AC power through the inverter when using shore or generator power
High/Low Battery Protection: If your battery voltage reaches below 10 VDC or above 17 VDC, the MMS Series will automatically shut down
Current Overload Protection: Automatically shuts down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage
Front mounted On/Off switch with an easy-to-read LED indicator
Built in Input and Output circuit breakers
Battery Temperature Sensor is included
Inverter Specifications:
Input battery voltage range: 9 to 17 VDC
Nominal AC output voltage: 120 VAC ± 5%
Output frequency and accuracy: 60 Hz ± 0.005%
1 msec surge current (amps AC): 38
100 msec surge current (amps AC): 21
5 sec surge power (real watts): 1750
30 sec surge power (real watts): 1600
5 min surge power (real watts): 1200
30 min surge power (real watts): 1050
Continuous power output at 25° C (with 1.0 PF): 1000 VA
Continuous current output: 133 AAC
Inverter efficiency (peak): 87%
Transfer time: 16 msecs
Search mode (typical): 5 watts
No load (120 VAC output, typical): 19 watts
Waveform: Pure Sine Wave
