Make your own scandi inspired wood vases! These are simple the only tool you will need is a glue gun. Tag me at @perkinsonparkway if you make one. #PerkinsonParkwayDIY
[ Ссылка ]
IG : @perkinsonparkway - [ Ссылка ]
Pinterest: @perkinsonparkway - [ Ссылка ]
Tik Tok: @perkinsonparkway - [ Ссылка ]
WOOD VASE DIY
— Supplies —
Wooden rings in various sizes. Large 3.8 inch Hobby Lobby wooden rings here
Vessels in various sizes
Hot glue gun and glue sticks
Leather or cardstock
Scissors
Clamps (not needed, but can be helpful)
— Wood Vase Project Steps —
1. Choose a glass vessel that fits inside of the wood ring size of your choosing.
2. Take wooden ring and trace on leather and cut out leather piece.
3. Glue leather circle onto bottom of the wooden ring with hot glue.
4. Place bead of hot glue in middle of leather circle and place vessel centered inside of the wooden ring.
5. Put hot glue on the inside edge of the bottom wooden ring, place second wooden ring on top of the first ring. Ensure they are aligned before the glue starts to harden. Run an additional line of glue along the inside seam of wooden ring 1 & 2 to secure the seam. Hold down ring down until glue hardens.
TIP: you are going to want the seams to be as tight as possible. You will need to smooth out the hot glue and move quickly. Wood glue makes a tighter seam but takes longer. I used clamps on one of my vases and it kept everything snug. It isn’t needed, but makes it look a little more polished.
6. Add third ring in same manner as the first. Continue gluing one wooden ring on top of the other until you reach the desired height.
7. Once you reach the last ring, you should not see any of the vessel over the top of the highest wooden ring.
8. Find a smaller wooden ring that fits inside your top ring, place a line of glue around the lip/edge of the top of your vessel and adhere the smaller wooden ring.
9. You’re done!
#short
