In this video, I show you how to mount the new Vortex Strike Eagle 5-25x56, FFP, EBR-7C (MOA) Reticule rifle scope.

FIREARM SAFETY
Always ensure your firearm is safe before use:
1. Safety Catch applied.
2. Magazine removed / Integral magazine emptied.
3. Chamber, bolt face and action (magazine well) clear of rounds and empty cases.
4. Working parts/bolt fully open and locked.

Timeline
00:00 Intro
00:14 Attach bottom half of the scope rings to the rail (pushing them as far forward in the Picatinny rail as they will go).
00:19 Set the scope into the rings.
00:25 Lay behind the rifle in a comfortable position
00:33 Move the scope back and forth to determine the correct eye relief.
00:57 Mount the rifle a few times to check it is correct.
01:06 Place the top rings on without disturbing the scope position.
01:12 Insert the bolts.
01:42 Screw the bolts so that the top rings remain loose.
01:50 Use a bubble to level the scope without disturbing the eye relief (Scope position). Note: Before this stage, ensure you have levelled the rifle too by using a level bubble on the Picatinny rail and propping up the bipod so its 100% level.
02:00 Nice and level :)
02:03 Tighten the bolts without disturbing the level bubble. Work bolts in diagonals across from each other to ensure they are tightened evenly.
02:14 Fit the throw lever so the throw handle is on the middle magnification (12).
02:26 Ensure its still level.
02:30 Scope now mounted :)
02:36 Nice and low scope height.

Thank you for watching, please like and subscribe.

FOLLOW ME FOR EXTRA CONTENT
YOUTUBE – [ Ссылка ]
INSTAGRAM - [ Ссылка ]
FACEBOOK - [ Ссылка ]

#jackalfirearms #vortexoptics #vortexnation #precisionrifle #precisionrifles #precisionrifleshooting #rifle #longrangeshooting #longrangehunting #remington700 #joncresswelluk #dolphinguncompany #riflescope #howto

свернуть