Buy Now!
New CV Axle Assembly Set from 1AAuto.com [ Ссылка ]

A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications. This video shows you how to install one on the driver side of your 2008-12 Jeep Liberty.

• Check here for more videos on the 2008-12 Jeep Liberty: [ Ссылка ]

This repair was done on a 2010 Jeep Liberty and the process should be similar on the following vehicles:
2008 Jeep Liberty
2009 Jeep Liberty
2010 Jeep Liberty
2011 Jeep Liberty
2012 Jeep Liberty

Tools you will need:
• Pocket Screwdriver
• Pry Bar [ Ссылка ]
• 21mm wrench
• 18mm Socket
• 19mm Socket
• 21mm Socket
• 22mm Socket [ Ссылка ]
• 34mm Socket [ Ссылка ]
• 36mm Socket [ Ссылка ]
• Brake Caliper Hanger [ Ссылка ]
• Side Cutters
• 1/2 Inch Impact Gun [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Swivel
• Torque Wrench [ Ссылка ]
• Copper Anti-Seize
• Cotter Pin
• Rust Penetrant
• Safety Glasses
• Center Punch [ Ссылка ]
• Drain Pan
• Hammer
• Rubber Mallet
• Sledge Hammer

Subscribe: [ Ссылка ]

Check out our playlist:
Jeep Liberty 2008-2012 2nd Gen: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть