Buy Now!
New ABS Wheel Speed Sensor from 1AAuto.com [ Ссылка ]
New ABS Wheel Speed Sensor Set from 1AAuto.com [ Ссылка ]

This video shows you how to install a new ABS wheel speed sensor for your 2008-2013 Nissan Rogue. ABS wheel speed sensors are critical to the operation of your vehicle's ABS and ESC systems, which use real time wheel speed data to ensure your vehicle stays safe and on the road. These magnetic sensors are sensitive and susceptible to damage, which would require replacing them.

This repair was done on a 2009 Nissan Rogue S 2.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue

Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 21mm Socket
• Pliers
• 1/2 Inch Impact Gun [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Driver
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Drill
• Gloves [ Ссылка ]
• Rust Penetrant
• Safety Glasses
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Pick [ Ссылка ]
• Wheel Chocks

Subscribe: [ Ссылка ]

Check out our playlist:
Nissan Rogue 2008-13 1st Generation: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть