Buy the Yamaha 60HP input seals seals and O-ring here: [ Ссылка ]
NOTE: You will need to order TWO of the oil seals (part number 93101-23070-00) on the parts list to complete this job.
See how to replace the input seals on a Yamaha T60 outboard in this video from Boats.net. We’re starting with the lower unit removed and the water pump housing removed from the lower unit. If you need to see how to do those parts of the process, find them here:
Yamaha 60 lower unit removal: [ Ссылка ]
Yamaha 60 water pump replacement: [ Ссылка ]
With the water pump housing removed, it’s a fairly simple job to replace the O-ring and seals. We’ll get the O-ring swapped out and then get the new seals in place. A note here: Yamaha makes a special tool that helps you get the oil seals to the correct depth inside the water pump housing. We’ll just use a conventional press and use the existing corrosion on the housing to tell us the depth to press in the seals.
See this diagram for a better look at the Yamaha 60 input seals and the O-ring to understand how they’re situated in the lower unit: [ Ссылка ]
Read how to do this job step by step: [ Ссылка ]
VIDEO HIGHLIGHTS:
Removing the oil oil seals - 1:00
Replacing the O-ring - 1:37
Replacing the oil seals - 1:50
Find Yamaha outboard parts here:
[ Ссылка ]
Talk to us:
Twitter: [ Ссылка ]
Facebook: [ Ссылка ]
Instagram: [ Ссылка ]
In the video we’re working with a 2003 Yamaha 60 HP 4-stroke outboard motor, but you may have similar steps for your Yamaha outboard. If you’re not sure whether these steps apply to your motor, leave a comment and we’ll get back to you.
Yamaha 60HP gearcase lube change:
[ Ссылка ]
#YamahaOutboards
