For more information, please visit:
[ Ссылка ]
or call us at 1-877-774-6473.

This kit is available for the:
2003-2012 Dodge Ram 2500/3500
2004-2008 Dodge Ram 2500/3500 (Not Dually)
2006-2008 Dodge Ram 2500/3500 (Dually)
2006-2008 Dodge Ram 1500 (Mega Cab)

The first this you’re gonna see when you open up the kit is instruction manual. Now to recommend to read through it just to get yourself familiar with the parts and pieces that come in this kit. Also including the kit are two heavy duty air springs, two bail clamps, two upper brackets, two lower brackets, two spacers, two upper bracket braces. Now it’s important that you don’t fold or kink the airline tubings. You also gonna get a heat shield. The heat shield gonna be installed on passenger air bag. It’s gonna mount between the air spring and the upper brackets. And finally all the necessary hardware that you’re gonna need to install the kit on your truck or SUV. Now we noticed that our customers like to install this bolts on the back of your truck around with the license plates. That way it’s easy for them to back up the truck with air compressor, fill up the air bags and then be on their way. Installation time varies between one-two hours. So this kit will work with a embedded hedge and a duly model, it will not work with a cab or a chassis. this is one of our most popular Firestone airbag head. So why should you buy the Firestone airbag helper spring kit for your Dodge RAM 2500,3500? That’s a good question! This kit will give you a increased level load capacity of 5,000 pounds, so whether you are towing a horse trailer or boat just hauling heavy supplies, you get the load support that you need. Firestone has designed their kits with your safety in mind giving you a load safe capacity with this kit. This heavy duty air springs will also improve your ride and handling, increased traction and reduced suspension fatigue giving you years of worry free service.
This Kit will make carrying heavy loads safer for you and your vehicles. Also included in this kit are individual inflation valves letting you level your vehicle from front to rear or side to side whenever you’re carrying a off center load. As I mentioned this kit can be used with BMW gooseneck hitches. The upper brackets will be bolt into the inside of the vehicle’s frame while the gooseneck hitch will use the outside of the frame to mount. Okay, so you are ready to purchase this kit but first you want to check out the installation procedure. Just scroll aboveand we have a link for you to view save and even printing instructions for this kit. We also have a firestone installation video that you can view on our Firestone airbag kit main page. The air helper spring will be installed between frame of vehicle and the suspension giving you both support using air pressure. Then after you read the instruction manual you’re gonna want to pre assemble the air bags. You’re gonna bolt in the upper brackets and then you’re gonna bolt in the lower brackets. You don’t gonna go to remove the downs bumpers for your truck or SUV. You don’t wanna hold on those bolts because all those bolts you’re gonna mount the top bracket to your vehicle. Top bracket is gonna go to the down bumpers ends. The lower brackets are gonna sit in the excel of your vehicle. You install the air springs and tubings on the vehicle, you’re gonna check for the leaks using a water and a soap solution. If you se bubbles forming that means you have a leak. It’s very very important that you’re not gonna exceed the gross vehicle weight, very important. Finally it’s require to maintain a 5 PSI in your air bags all the time. Here at SD trucksprings dot com a lot of our customers have different questions concerning this kit. I’m interested in couple of them right now.
The First question is: Will this kit work with my lifted truck?
The Answer is: Yes, however additional hardware is required to make up for the space between the axle and the frame. Depending on how much of a lift you have on your vehicle will determine which lift spacers you would want to choose.
The second question is: My 3500 is a dually, will this kit still work with my vehicle?
Answer: Yes, this kit is designed to work with both the single rear wheel and the dual rear wheel applications.
Third question is: I do not want to drill holes into my vehicle’s frame, does this kit requires drilling?
The Answer is: No, this kit does not require drilling. The brackets are designed to bolt into pre-existing holes in the factory frame.


свернуть