Drip irrigation system made from simple bottles. Anyone can make. All you need is...
Drip irrigation is the method of choice for plants, as is common knowledge. Due to the fact that it allows them to gradually take in and absorb water, this is the most effective method for them. The growth of cucumbers and other plants with shallow roots requires frequent irrigation in order to be successful. Gardeners have a wide range of options to choose from when it comes to drip irrigation systems because they can be utilized for a wide variety of various vegetables and flowers.
One can easily construct a drip irrigation system by making use of materials that are not complicated. You must first acquire a plastic bottle that is one liter in capacity. First, remove the bottom of the bottle by chopping it off. You will find that it is much easier to fill it with water as a result of this. The next step is to drill a few very small holes along the cut edge of the bottle. Because the bottle is going to be attached to a bamboo stick, these holes are extremely important because of their purpose.
Make a very small hole in the cap at this moment. The water will slowly seep out of this hole as it continues to fall. In order to control the drip, you should place the upper half of an ear cleaning stick into the opening of the cap. By carrying out these steps, the hole will be almost completely sealed off, and only a small amount of water will be able to pass through.
The bottle should be attached to a bamboo stick using a twist tie once the cap is ready to be attached. When the bottle is placed on the ground, the bamboo stick will assist in maintaining its stability and helping it to remain upright. It is imperative that the bottle be securely tied in order to prevent it from moving around or falling over.
After you have finished preparing your drip irrigation system, you should now install it in your garden. Place the bamboo stick in the ground close to the plant that you have chosen to water after you have made your decision. The top of the bottle should be slightly raised off the ground rather than completely flat. This configuration makes it possible for water to seep directly into the ground close to the roots of the plant. For your garden, you are able to construct an unlimited number of these systems to meet your needs.
