Buy Now!
New Control Arm with Ball Joint from 1AAuto.com [ Ссылка ]
This video shows you how to install new front lower control arms from TRQ on your 2013-2020 Nissan Pathfinder. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This repair was done on a 2014 Nissan Pathfinder SV 3.5L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2013 Nissan Pathfinder
2014 Nissan Pathfinder
2015 Nissan Pathfinder
2016 Nissan Pathfinder
2017 Nissan Pathfinder
2018 Nissan Pathfinder
2019 Nissan Pathfinder
2020 Nissan Pathfinder
Tools you will need:
• Pry Bar [ Ссылка ]
• 18mm Wrench
• 21mm wrench
• 18mm Socket
• 21mm Socket
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Anti-Seize Grease
• Gloves [ Ссылка ]
• Safety Glasses
• Floor Jack [ Ссылка ]
• Hammer
• Rubber Mallet
• Wheel Chocks
Subscribe: [ Ссылка ]
Check out our playlist:
Nissan Pathfinder 4th Generation 2013-2020: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
