Get the parts and supplies for your Honda CBR929 stator replacement here: [ Ссылка ]

Then get your tools together:
1/4 ratchet
12mm socket
8mm socket
10mm socket
6mm hex
Gasket scraper
Torque wrench
Drain pan

Learn how to replace the stator on a Honda CBR 929RR motorcycle. We’ll show you how to remove the seat so that you can access the wiring in order to disconnect the stator. Then, we’ll work down and show you how to remove the stator on your CBR929 by removing the stator cover. Next, we’ll replace the stator and show you how to reseal the stator cover with sealant and a new gasket.

Read how to do this job step by step: [ Ссылка ]

Need parts for your Honda motorcycle? Partzilla.com has thousands of OEM and aftermarket parts and diagrams! Click here to get started: [ Ссылка ]

VIDEO HIGHLIGHTS:
Removing the seat - 0:15
Removing the rear bracket - 0:25
Removing the stator cover - 1:00
Installing the new stator - 1:45
Installing the gasket - 2:45
Closing the stator cover - 2:55

In the video we’re working with a 2000-01 Honda CBR929RR, but you will have similar steps for your Honda motorcycle. If you’re not sure whether these steps apply to your motorcycle, leave a comment and we’ll get back to you.

RELATED CONTENT:
Replacing the clutch pack on a CBR929RR
[ Ссылка ]
How to rebuild the clutch on a CBR600RR:
[ Ссылка ]

свернуть