After you turn it on, press the [M] button to enter the parameter setting, press the [M] button to switch the parameter to P03, and press the [+] button to adjust the parameter value to 99. you can adjust the parameter value according to your needs. Don't move after adjustment, it will automatically exit the setting parameter page after a few seconds, and will also automatically save.
P03-00 means unlimited speed. 50 or so is almost 25km/h;
-------------------------- M parameter setting method ------------------------
· Press [M] button to enter the settings parameter, then press [M] button will show: P1(10C), P2(km/h), P3(00), P4(48V), P5(00), P6(00/99).
P01, enter the wheel diameter setting, press the [up] button or press the [down] button to adjust the setting (in inches) G2Pro - Adjust P01 parameter value tutorial [ Ссылка ]
P02, switching speed units (KMH/MPH). press the [up] button or [down] button to adjust.
P03, setting the speed limit mode. 00means max speed, 01mean min speed.
P04, battery voltage, 48V.
P05, switching start-up mode. 00 means zero start mode, 01 means non-zero start mode.
(The scooter has two start modes: zero start and non-zero start. Zero start mode: press the accelerator to ride; Non-Zero start mode requires a speed of 5km/h to start, in other words, you need to use your feet to help the scooter slide for a distance, and give the scooter a speed of 5km/h to start Riding, in this state, it is impossible to ride just by pressing the accelerator.)
P06, you can not change it. two versions, 00 or 99, if you changed it, pls try which one is right.
