This video shows how to replace or service Brembo brakes on a Mitsubishi Lancer Evolution X GSR.

STEPS
1. Use a breaker bar to loosen lug nuts
2. Remove lug nuts with impact wrench
3. Remove wheel
4. Use a nail punch and hammer to remove two pins
holding bracket.
5. Use plyers to pull out pins
6. Use plyers to pull out brake pads
7. Remove shim plate from brakes and lightly
spread brake lube on the back of brakes and the
back of shims
8. Spray brake clean on pins, bracket and then wipe
clean. Put brake lube on the pins also
9. Place the brakes back in and line up the holes.
Make sure the two pins have room to slide
through
10. Use a hammer and nail punch to put the pins
back in
11. Put wheel back on and lower car

Use my referral link to purchase a Tesla and save $650

[ Ссылка ]

Please Subscribe and Give a THUMBS Up 👍
[ Ссылка ]

#Brembo #evox

свернуть