Step-by-Step Tutorial: Safe Lifting Techniques with Terrier Clamps
(TDH)

Before use: Please read the full manual.
Step 1: Check if the WLL is correct for the job. Horizontal clamps must be used in a pair or more.
Step 2: Check whether the clamp has any visible damage.
Step 3: Check if the teeth of the clamp are clean and sharp
Step 4: Open and close the clamp to check if it opens and closes smoothly.
Step 5: Clean the position where the clamp will be attached.
Step 6: Make sure that the clamp is placed in a position where the load will be in balance.
Step 7: Make sure that the plate is in the "neck" of the clamp.
Step 8: Close the clamp by tightening the attachments.
Step 9: Make sure that all attachments have the correct capacity and are large enough to allow the clamp to move freely.
Step 10: Lift gently to allow lifting force to be applied.
Step 11: Make sure that the load is in a stable position before loosening the clamp from the plate.
Step 12: Open the clamp by loosening the force on the attachments.
Step 13: Store the clamp safely.
In case the clamp is slipping, please check all steps again.
If the clamp keeps slipping, do not use the clamp and contact a professional Terrier dealer.

Find more information about this clamp on our website:
[ Ссылка ]

Terrier Lifting Clamps: Quality clamps you can trust!

#terrierliftingclamps #liftingsolutions #liftingclamps #horizontallifting

свернуть