How to Replace Capacitor damage Rule must the same
How to replace Elco Capacitor damage
Only 2 rule
1. Must the same Farad (the same uF number)
2. Using the same voltage or higher
Match the Capacitance: The new capacitor's capacitance (measured in microfarads, µF) should be
the same or slightly higher than the original capacitor. Using a slightly higher capacitance is usually okay, but a significantly higher value can cause problems.
Match or Exceed the Voltage Rating: The new capacitor's voltage rating should be equal to or higher than the original capacitor. Using a lower voltage rating is dangerous and could lead to the capacitor exploding.
Polarity Matters!
Electrolytic capacitors have a positive and negative terminal. It's crucial to match the polarity when installing the new capacitor. The negative terminal is usually marked with a stripe on the capacitor body and a minus sign (-) on the circuit board. Incorrect polarity will damage the capacitor.
Identification board using 2 or 3 layers design
We recommend, cut and leave the pin old capacitor and connect to new Elco if possible.
Compare make your headache, because new pin can't connect in innder board circuit
