If you would be kind to support the channel you can do it via this link
[ Ссылка ]

In this video learn what you need to do in order to achieve steady idle on the Ke-Jetronic.
#fixyourmercedes##mercedeskejetronic##steadyidle#

[ Ссылка ]

Timecode

0:00 Intro
0:02 - 0:55 About the video
0:56 - 1:32 What maintains the idle/video
1:33 - 5:51 Preconditions for a steady idle/video
5:52 - 7:33 How does it work
7:34 - 11:22 A good working ICV/video
11:23 - 11:52 Do I have to buy a new ICV
11:53 - 13:00 How do I take the ICV off my car
13:01 - 15:03 Cleaning the ICV
15:04 - 15:56 The specs for the ICV
15:57 - 18:55 About the mixture adjustment
18:56 - 20:11 Just joking for the end
#idle# #steadyidle# #w124onidle#

What am I talking about?
My topic is the KE-Jetronic injection system which I try to demystify as much as I can.
For all of you to understand the system in brief - Developed in 1973 and being mounted into cars up to 1993 as it went in history. But why these to letters!?(KE) K(from German "kontinuierlich" meaning continuos, without interruption) the MECHANICAL injection system on which the fuel starts flowing from the fuel tank sucked by the FUEL PUMP and delivered to the FUEL DISTRIBUTOR which sends fuel to the INJECTORS while the majority of it flows through the FUEL PRESSURE REGULATOR through its return line back to the fuel tank again. The letter E(electronic) has to mark the electronic sensors (the developement starting from early eighties) which had to inform the ECU about the current state of the engine so that the ECU(Electronic Control Unit) then could create current signal in mAmp(miliampers) and send it to four crucial components for the system - the EHA(the electro-hydraulic actuator,a unit consisting of a magnet, an electromagnet and a baffle plate) which had to fine tune the engine in each of its phases, the ICV(the idle control valve), the unit which was predicted for the engines perfect idle, the X11(the diagnostic socket) where the duty cycle(the ideal mixture) was adjusted and the X11/4(the code reader) - the socket which from any codes were read if present using an OBD1 scanner.
An extraordinary injection system which could be fully repaired in your own garage using a multimeter and a pressure gauge only for its fine tuning, together with some common tools.
"Happy Mercedesing"

свернуть