Origami Flower: How to Make a Kusudama Paper Flower (Step by Step):

Hello, and Welcome to our Origami Kusudama Flower video. So this is a flower that's made from five (5) units To make the first unit take a square of origami paper color side down we'll make a valley fold along the diagonal, as we're showing here. Make sure you crease this well. Now we'll take each of the bottom corners in turn and fold to the top corner as we're showing here. Now repeat that with the other corner. Next, we're going to take this line here and fold it onto this other line just like this. Repeat that on the other side. Now once you've done that we're going to unfold this flap and fold out this piece to make a squash fold as we're showing here. Squash that flat. Then crease it. Now we're going to repeat that on the other side. Once you're happy with those squash folds we'll fold down this top corner as we're showing here Fold it back on itself and repeat that on the other side. Okay, now we're going to fold this piece over on itself. We'll repeat that on the other side. Now we need to glue these two (2) pieces together to form one of the modular sections of the flower and you can use various types of glue to do this. We're going to use Glue Dots which are just little pieces of adhesive on a backing and so we'll put three (3) glue dots on each of the flaps here Just put the adhesive side down Rub the paper with your fingernail. The peel away the backing, leaving the adhesive stuck to the paper. And as I said you could use pretty much any type of glue, white glue or yellow glue even double-stick tape would work. We're just gonna put down a couple more of these. When you're happy that you have enough glue in place then you bring the two (2) flaps together like this. Line them up carefully press them together. It helps if you stick your fingers inside the piece and apply some pressure to make the glue stick. And then just arrange these inside pieces like this symmetrical, more or less. Now you're going to make five (5) of these and we're going to glue these together with rubber cement. Again, other types of glue would work, this is convenient and we happen to have some, so we'll use that. We're just going to put a thin layer at the top edge of the piece. About half a centimeter to a centimeter wide. You let that dry for several minutes. We want to do that for all five (5) pieces. Then start assembling them. Start with the first two (2). Just line up the edges like this press them together Sticky your fingers inside to help Apply some pressure. Looks good so we will apply the third piece. Once you get the hang of it, it's pretty easy. The fourth piece. The fifth and last piece is a little trickier. You want to kind of spread out the gap between the first and the fourth pieces like that Make enough room for that fifth piece to go in. The apply some pressure as we did before, to make the glue stick. And there you have it, your Origami Kusudama Flower. Enjoy!

What Will We Need To Make This :

#Color Paper (A4 Size)
#Glue
#Scissors

Music: [ Ссылка ]

свернуть