Buy Now!
New Engine Water Pump from 1AAuto.com [ Ссылка ]
This video shows you how to install a new engine water pump from TRQ on your 2007-2012 Nissan Altima. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This repair was done on a 2008 Nissan Altima S 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2007 Nissan Altima
2008 Nissan Altima
2009 Nissan Altima
2010 Nissan Altima
2011 Nissan Altima
2012 Nissan Altima
Tools you will need:
• 12mm Wrench [ Ссылка ]
• 14mm Wrench [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 13mm Socket [ Ссылка ]
• 14mm Socket [ Ссылка ]
• 21mm Socket
• Coolant Funnel Set
• Trim Tool Set [ Ссылка ]
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet [ Ссылка ]
• 3/8 Inch Drive Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Anti-Freeze
• Gloves [ Ссылка ]
• Safety Glasses
• 5mm Hex Socket
• Drain Pan
• Floor Jack [ Ссылка ]
• Razor Blade / Gasket Scraper
• Wheel Chocks
Subscribe: [ Ссылка ]
Check out our playlist:
Nissan Altima 2007-2012 4th Gen: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
