Buy Now!
New Brake Shoes from 1AAuto.com [ Ссылка ]

This video will show you how to install new drum or parking brake shoes on your 2009-2013 Honda Fit. For drum brakes and parking brakes, shoes will eventually need to be replaced. If you are overhauling your rear brake system, or just need to replace worn out shoes.

This repair was done on a 2010 Honda Fit Sport 1.5L Hatchback 4-Door FWD Manual and the process should be similar on the following vehicles:
2009 Honda Fit
2010 Honda Fit
2011 Honda Fit
2012 Honda Fit
2013 Honda Fit
2014 Honda Fit

Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Pry Bar [ Ссылка ]
• 19mm Socket
• Needle Nose Locking Pliers
• Pliers
• 1/2 Inch Impact Gun [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Anti-Seize Grease
• Brake Grease
• Brake Parts Cleaner
• Hammer
• Wire Brush [ Ссылка ]

Subscribe: [ Ссылка ]

Check out our playlist:
Honda Fit 2009-2014 2nd Generation: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть