Marantz PM8005 (previous model before Marantz PM8006)
Timecode on timeline: Unpacking amplifier Marantz pm8005
00:00 Marantz pm8005 integrated amplifier.
00:09 open the box with the amplifier.
00:17 Remote control, batteries and a power cable.
00:35 Marantz pm8005 unboxed.
00:44 Front panel of amplifier.
01:04 Rear panel of amplifier.

Integrated amplifier is assembled on discrete elements according to the current feedback circuit. The amplifier has audiophile sound quality and excellent functionality. Based on this device, you can create universal Hi-FI audio systems.
The output power of the Marantz PM8005 is 2 x 70 W (8 Ohm) and 2 x 100 W (4 Ohm). The amplifier has a symmetrical design and this results in excellent channel separation in stereo. The power supply of the amplifier contains a toroidal transformer that provides dynamic sound. The transformer is housed in a double shield to eliminate electromagnetic interference. The source rectifier has high speed Schottky diodes. And audiophile components are installed in the device itself.
A sufficiently powerful power supply with a current, the current feedback of the Marantz PM8005 amplifier, I can confidently work with floor-standing speakers with a low impedance. Proprietary HDAM amplification modules are used in the amplifier, and the bottom panel of the case is made of three layers to damp mechanical vibrations.
Three tone control ranges (bass, mid, treble) make it easy to set up the optimal tonal balance. This allows you to fine tune the operation of the entire system depending on the characteristics of other components. You can also take into account the geometry and acoustic characteristics of the room in which the speaker system is located. On the rear panel of the Marantz PM8005 there are five line inputs, an input for connecting an MM-pickup of a turntable, an output for a recording device. There is also an adjustable preamp output and a direct power amplifier input. All connectors on the amplifier have gold plated contact surfaces.
The device is equipped with convenient proprietary SPKR-100 terminals for connecting speakers, the impedance of which can be in the range from 4 to 16 ohms. You can also connect headphones with a 6.3 mm jack to the amplifier.
Marantz PM8005 Stereo Amplifier Features
Output power 2 x 70 W (8 ohms), 2 x 100 W (4 ohms)
Frequency Response 5 Hz - 100,000 Hz (± 3dB)
Signal to Noise Ratio More than 106 dB (Line In), More than 87 dB (Phono)
Harmonic distortion less than 0.02% (1 kHz)
Damping factor 100
Inputs 6 RCA, power amplifier, MM phono stage, remote control system
Preamp outputs, recording, headphones, for two pairs of speakers
Sensitivity / impedance 2 mV / 47 kΩ (Phono), 200 mV / 20 kΩ (linear)
Tone control LF, MF, HF
HDAM modules SA2, SA3
Direct signal input mode, Source Direct
Auto power off is
Power consumption 220 W
Dimensions (WxHxD) 440 x 128 x 379 mm
Weight 12 kg
#MarantzPM8005 #MarantzPM8006 #integratedamplifier

свернуть