Installing the WheelDock Motorcycle Wheel Chock is straightforward and efficient. Here's how:
The WheelDock Wheel Chock comes with flush mounting hardware, making it easy to mount in your trailer. It allows your front wheel to stop just a quarter inch from the forward wall, maximizing space. Since it's a free-standing chock, you can position it in various spots until you find the perfect location for single or multiple bike installations.
Installation Steps:
1. Position the Chock: Open the chock, roll your bike out, and find the right spot in your trailer.
2. Drill Holes: Drill two half-inch holes through the ends of the key slots.
3. Secure Tee Nuts: Drive the two tee nuts into the drilled holes from the top side. Install two 3/4-inch wood screws on the lip of the tee nuts to keep them secure.
4. Mount the Chock: With the tee nuts in place, mount the bolts from the top and lock the chock in place using the provided half-inch bolts. Tighten the bolts with the included wrench.
5. Removal for Garage Use: To use the chock in your garage, reverse the mounting procedure. Loosen the bolts and lift the chock out of the trailer. Ensure the bolts are flush with the floor when the chock is removed.
This versatile installation process allows you to easily switch the WheelDock between your trailer and garage, providing stability and convenience wherever you need it.
🔗For more info on the WheelDock Wheel Chock or to purchase one, visit [ Ссылка ]
✉ Please contact us with any questions: [ Ссылка ]
Let's Connect!
Facebook: [ Ссылка ]
Instagram: [ Ссылка ]
