Click for more info and reviews of this Dexter Axle Trailer Hubs and Drums:
[ Ссылка ]
Check out some similar Trailer Hubs and Drums options:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]
Full transcript: [ Ссылка ]
Rate your transcript OrderClientKevin BrossRef #20704Order #TC0356093255 Today we're going to review part number 8-247-5OUC3. This is the Dexter 10 inch trailer hub and drum assembly for 3500 pound axles. Has the 5 on 4 and a half inch bolt pattern. This one has a Galdex finish. Now, this Galdex finish assembly is corrosion resistant and it's great for marine use. This is designed to fit 3500 pound axles with drum brakes.
Now, this part number will include everything shown here. Includes the one hub and drum, includes the inner and outer bearings. Now, the bearing races are included. They are pre-installed into the drum themselves. Includes the double lipped grease seal.
Includes this grease cap and then the lug nuts. Now, all of the Galdex hubs and drums will undergo a test in which they are sprayed with a 5% salt solution. This will help determine the corrosion resistance, over time. These products are able to withstand 500 hours of constant exposure to the salt water mist. Now, this 500 hour salt spray rating will indicate that the product is not only durable enough to last in fresh water environments, but it can also be used on trailers that come in contact with salt water. These are ideal for use on a boar or a snowmobile trailer. A few specs on this again.
The application is 3500 pound axles with the number 84 spindles. This does work with the 10 inch by 2 and a quarter inch electric and hydraulic brake assemblies. The bolt pattern again is 5 on 4 and a half inches. The wheel studs are a half inch diameter. Now, the weight capacity on one of these is 1750 pounds.
When one of these is used with one on the other side, that will get you your 3500 pound weight capacity. Now, the dimensions on this drum. You got a diameter. It's going to be 10 inches and the width of it is going to be 2 and a quarter inches. Now the bearing that are included, everything shown here. The inner bearing is part number L68149. That would go in the inside right there. The outer bearing, which is L44649, go right in there onto the race. The grease seal, which is 58846, it goes on the very back after your bearing's installed. Then your grease cap, then the 5 half inch by 20 lug nuts, that we'll be using. That would be used once you put your tire and wheel on. The lug nuts would hold your tire and wheel assembly to this hub and drum. That should do it for the review of part number 8-247-5OUC3, the Dexter 10 inch trailer hub and drum assembly for 3500 pound axles, the 5 on 4 and a half inch bolt pattern in the Galdex finish. .
Ещё видео!