How to Install Retrax Tonneau Cover: Retractable Truck Bed Cover at Truck Access Plus

Installing a Retrax retractable tonneau cover on your truck bed is a great way to enhance its security, weather protection, and overall utility. At Truck Access Plus, we specialize in the professional installation of high-quality truck bed covers like those from Retrax. Here’s a comprehensive guide on how to install a Retrax retractable tonneau cover, ensuring a seamless fit and optimal performance.

1. Prepare Your Truck Bed
Start by cleaning your truck bed thoroughly. Use a rag and alcohol wipes to remove any dirt, debris, or grease from the surface where the tonneau cover will be installed. This step ensures that the cover adheres properly and provides a secure fit.

2. Unpack the Retrax Tonneau Cover Kit
Carefully unpack the Retrax tonneau cover kit and check that all the components are present. The kit should include the following:

Retractable cover assembly
Side rails
Clamps
Drain tubes
Hardware (screws, bolts, etc.)
Installation instructions
3. Install the Side Rails
Begin by positioning the side rails on the truck bed. Align the rails with the edges of the bed, ensuring they are straight and level. The rails should sit flush against the bed sides without any gaps.

Position the Rails: Place the rails on the bed rails of your truck, ensuring that the weather stripping on the rails is seated properly against the bed.
Secure with Clamps: Using the provided clamps, secure the side rails to the truck bed. Start with the clamps at the front and work your way towards the back. Tighten the clamps with a socket wrench, but do not overtighten as this could damage the rails or truck bed.
4. Attach the Retractable Cover Assembly
With the side rails securely in place, you can now attach the retractable cover assembly.

Align the Cover: Position the retractable cover at the front of the truck bed, aligning it with the side rails. The cover assembly should fit snugly between the rails.
Secure the Cover: Using the provided hardware, secure the cover assembly to the side rails. This typically involves sliding bolts into the rails and tightening them with a socket wrench. Ensure that the cover is centered and level before fully tightening the bolts.
5. Install the Drain Tubes
To ensure proper drainage and prevent water buildup, install the drain tubes provided in the kit.

Locate the Drain Holes: Identify the drain holes on the retractable cover assembly.
Attach the Drain Tubes: Connect the drain tubes to the drain holes, ensuring a tight fit. Route the other end of the tubes to the drainage points in the truck bed, usually through existing holes or by drilling new ones if necessary.

Open and Close the Cover: Gently pull the cover to the closed position and latch it. Then, retract the cover back to ensure it moves smoothly along the rails.
Check Alignment: Ensure that the cover aligns properly with the side rails and that there are no obstructions or misalignments. Make any necessary adjustments to the alignment and tighten all hardware securely.
7. Final Inspection and Adjustments
Perform a final inspection to ensure everything is installed correctly and securely.

Check Clamps and Bolts: Verify that all clamps and bolts are tightened properly. Recheck the alignment of the side rails and cover.
Inspect Weather Stripping: Ensure that the weather stripping on the side rails is seated properly against the truck bed to provide a good seal.
Clean Up: Remove any tools and cleaning supplies from the truck bed. Wipe down the cover and rails to remove any fingerprints or smudges.
Professional Installation at Truck Access Plus
While installing a Retrax retractable tonneau cover can be a straightforward DIY project, professional installation ensures that everything is fitted perfectly and operates smoothly. At Truck Access Plus, our experienced technicians provide expert installation services for all types of truck bed covers. Here’s why you should choose us:

Expert Technicians: Our team has extensive experience installing Retrax and other tonneau covers, ensuring a flawless installation.
Quality Assurance: We use the best tools and techniques to ensure your cover is installed correctly and securely.
Customer Satisfaction: We are committed to providing exceptional service and ensuring you are completely satisfied with your new truck bed cover.
Convenience: Our efficient installation process means you can get back on the road quickly with your new cover.

Installing a Retrax retractable tonneau cover on your truck bed is an excellent way to enhance its security, weather protection, and utility. By following this installation guide or opting for professional installation at Truck Access Plus, you can ensure a perfect fit and reliable performance. Trust us to provide the best products and services for all your truck accessory needs.

#tonneaucover #tonneau #truckaccessories #truckbed #pickuptruck #truck #retrax

свернуть