If you want to help me with any of my projects I have setup [ Ссылка ]
[ Ссылка ]

I made at least 3 versions of this and then kept adding a new bit the next day or having bad audio and or video. At last today I was happy with everything and decided to edit and upload. I didn't show all of the revisions of the 3d printed parts, but you can imagine the steps as I went along.

Things to do.

increase the heat up times as it's a little slow and also it was having trouble keeping it at 240 (this could be too high for the solder paste anyway)

Look at some form of active cooling controlled by the teensy or find a convection oven and start again.

Test the temps of the PSU module with the cover on as is only rated for 70 degree C.

On the next vid I ill have refined the curve and used it to make some actual PCB I need.

свернуть