In this video I show how to connect a Multiplus II to a Lynx Distributor. Included is an introduction to the Victron Energy lithium batteries, Lynx Smart BMS 500, Lynx Distributor, Cerbo GX interface and Victron Connect app. I am happy to have a single vendor, smart system to control the electrics in my camper van; a Ford Transit 2021 Cargo HR Ext AWD.

Programming note: the Cerbo GX display can fit fully on an iPhone 12 Pro screen if you make it the 1 and only open tab in a "tab group". This eliminates other tabs meaning no tab row in the way and the full screen can be seen and interacted with.

**Note for the Multiplus-II case ground: ABYC recommends that the case ground is no smaller than 1x size down from main current carrying conductor. So if using 4/0 for main battery cable, per ABYC should have 2/0 for case ground (not 6 AWG as seen in the video).

Victron Wiring Unlimited (includes various fuse types): [ Ссылка ]
Victron Lynx Smart BMS 500: [ Ссылка ]
Victron Lynx Distributor: [ Ссылка ]
Victron Cerbo GX: [ Ссылка ]
Victron Multiplus II 2x 120V 3000VA: [ Ссылка ]
Victron Lithium Battery 12.8V (I have 2 x 330Ah batteries): [ Ссылка ]

свернуть