Buy Now!
New Sway Bar Link Set from 1AAuto.com [ Ссылка ]
New Sway Bar Link from 1AAuto.com [ Ссылка ]

This video shows you how to install new front sway bar links from TRQ on your 2010-2013 Kia Forte Koup. Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle.

Estimated installation time for a professional technician is approximately: 24 minutes

This repair was done on a 2012 Kia Forte Koup SX 2.4L Coupe 2-Door FWD Automatic and the process should be similar on the following vehicles:
2010 Kia Forte Koup
2011 Kia Forte Koup
2012 Kia Forte Koup
2013 Kia Forte Koup

Tools you will need:
• 17mm Wrench [ Ссылка ]
• 18mm Wrench
• 18mm Socket
• 21mm Socket
• Locking Pliers [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• 5mm Hex Socket
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]
• Wheel Chocks

Subscribe: [ Ссылка ]

Check out our playlist:
Kia Forte 1st Generation 2010-2013: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть