This video will demonstrate how to apply your new pillar covers.

First examine the contents of the package you received. Make sure that there are no missing or broken pieces. If any pieces are broken or missing contact us and we can send you a replacement. Leave the protective masking on the covers until they're fully installed to prevent scratching.

Once you have determined that all the pieces are present, test fit each piece on the vehicle to determine their correct location. You can label each piece so that you know where they belong. If the cover looks like it isn't fitting correctly, it's most likely because it goes in a different location. Some pieces may look very similar to each other but each one is made to only fit in one location.

After test fitting and labeling the pieces, wash the areas where they will be applied with soap and water. Let the areas dry completely and then use the provided alcohol pads to thoroughly wipe the area down.

You can now proceed to installing the covers. Begin by peeling off an inch of the adhesive side. You can fold over the adhesive film for easier installation. Using both hands, align the piece starting from the bottom up and begin to apply the piece while applying pressure from the bottom up removing the adhesive film in the process. We use an industrial grade adhesive so it will be very difficult to take the cover back off if you don't position it correctly. Do not apply pressure until you have aligned everything. Make sure the piece is flush and there are no air pockets or gaps underneath the glue.

Once everything in installed, you can remove the protective film on the front of the cover and enjoy the new look of your car.

The covers can be cleaned the same way that you would clean your car, just use a clean rag or towel to prevent scratching the surface. The covers have a very durable scratch resistant and stain resistant finish and will last the lifetime of your car.

Please e-mail us at "carboncovers@gmail.com" with any questions or problems you may encounter. We are the manufacturers of these covers and will do everything in our power to fix any problems or concerns you may have.

Thank you

свернуть