Click for more info and reviews of this etrailer E Track,Tie Down Anchors:
[ Ссылка ]
Check out some similar E Track,Tie Down Anchors options:
[ Ссылка ]
Click for more info and reviews of this etrailer E Track,Tie Down Anchors:
[ Ссылка ]
Check out some similar E Track,Tie Down Anchors options:
[ Ссылка ]
Click for more info and reviews of this etrailer E Track,Tie Down Anchors:
[ Ссылка ]
Check out some similar E Track,Tie Down Anchors options:
[ Ссылка ]
Click for more info and reviews of this etrailer E Track,Tie Down Anchors:
[ Ссылка ]
Check out some similar E Track,Tie Down Anchors options:
[ Ссылка ]
Click for more info and reviews of this etrailer E Track,Tie Down Anchors:
[ Ссылка ]
Check out some similar E Track,Tie Down Anchors options:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]
Full transcript: [ Ссылка ]
What's going on everybody Adam here with etrailer. Today, we're going to be taking a look at the etrailer backing plate and hardware kit. This is going to give our E-tracks extra strength especially if we have some thinner floors on our enclosed trailer or trailer. And also if we don't really have any access to get down and tap into that frame. If you have a mowing business, you want to make sure to take care of your equipment and make sure it stays in place whenever you're going down the road. Especially with mowers they don't have any suspension systems.
So it's really going to be rattling around, if you hit a bunch of bumps on the road. But if you're just doing it for your four wheeler or your side-by-side as well you just want to make sure it's not going to rip up. So it's rolling around inside your trailer. Also, we want to make sure and take care of our floor and not just make it look like Swiss cheese with a bunch of holes ripped in. If you want to get a little bit more confidence in your E-Track or your tie-down points in your trailer to really use them to their full potential, the backing plate is definitely going to help.
When installing accessories like tie-down points or E-tracks. If you really can't tap into the frame of your trailer, you're going to need a little bit more strength. Or if you're just trying to prevent a tear up from your trailer, if it's already happened the backing plate definitely going to solve your issue. Each backing plate is going to come with all the hardware that you need. We are going to have four long bolts, four nylon lock nuts, and four washers.
We're going to have four different kits. So if you're just using an anchor point or a D-ring, you just need to go ahead and grab the one. But if you are using let's say a eight foot track, we're going to have a four quantity version on our website. So grab that for that. And then if you have a five foot long track, you go ahead and grab three.
And then if you just have a two foot track, all you really need is just two of these brackets and it will come with all the hardware. So go on our website and grab what you need. Our backing plate is going to be able to be used with a lot of different track systems that we carry here at etrailer. A couple of different brands are going to work with it both vertical and horizontal, and also a lot of different accessories. With the multiple different holes. We can go ahead and rotate this just to get the holes to line up with whatever accessory we're putting on. For instance, with these tracks we can have them down here and if we rotate it like that. Everything's going to line up nice and neat. It's going to be the same for most track systems with our vertical tracks right here. What we are going to have to do, just kind of slide it to the side. We are going to be able to use the same holes here along with this as well. Many of our different anchor points are going to line up just like this. And again, with all these different slots there are so many different ways that we can go ahead and put a bunch of different accessories on here. Even with the smaller ones in the middle it's going to work. But one thing we want to make sure of when you're deciding on whether this is going to be a right fit for you. We want to make sure that we're not going to be taking and mounting stuff down in a cross fashion like this. We want to make sure
