Buy Now!
New Control Arm with Ball Joint from 1AAuto.com [ Ссылка ]
This video shows you how to install new upper control arms from TRQ on your 2009-2014 Ford F-150. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This process should be similar on the following vehicles:
2009 Ford F-150
2010 Ford F-150
2011 Ford F-150
2012 Ford F-150
2013 Ford F-150
2014 Ford F-150
Tools you will need:
• Pry Bar [ Ссылка ]
• 21mm wrench
• 10mm Socket [ Ссылка ]
• 13mm Socket [ Ссылка ]
• 15mm Deep Socket [ Ссылка ]
• 15mm Socket [ Ссылка ]
• 18mm Socket [ Ссылка ]
• 21mm Socket [ Ссылка ]
• 27mm socket [ Ссылка ]
• 30mm Socket
• 8mm Socket [ Ссылка ]
• Trim Tool Set [ Ссылка ]
• Locking Pliers [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Bungee Cord
• Copper Anti-Seize
• Gloves [ Ссылка ]
• Safety Glasses [ Ссылка ]
• Floor Jack [ Ссылка ]
• Hammer [ Ссылка ]
• Pole Jack
• Rubber Mallet [ Ссылка ]
• Wheel Chocks
Subscribe: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Ещё видео!