Click for more info and reviews of this Dexter Trailer Hubs and Drums:
[ Ссылка ]
Check out some similar Trailer Hubs and Drums options:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]
Full transcript: [ Ссылка ]
Speaker 1: Today we're going to take a look at the Dexter complete hub and drum assembly for hydraulic brakes on 2,200 pound axles, and this has the 4 on 4 inch bolt pattern. This part will include everything shown here. It includes both the inner and outer bearings. The bearing races are included, they are pre-installed into the hub. The grease seal is included, grease cap, the wheel bolts on the hub and then the four lug nuts. This is designed for use with the 7 inch by 1 3/4 inch hydraulic brake assembly only.
Application again is 2,200 pound Dexter axles. The drum dimension, we measure it, the inside diameter is going to be right at 7 inches. The width is right at 2 inches.Again, the bolt pattern on this is a 4 on 4 inch bolt pattern. The parts that are included, the bearings are both the same for the inner and outer bearing, it's part number L44649, has an inner diameter of 1.063. You can see they go right there and the inner bearing goes right in there.
The grease seal is included. It is a double lip grease seal, part number 10-9, has an inner diameter of 1.5 and outer diameter of 1.987. Once your bearing goes in the part there, then the grease seal goes in right there.Comes with the grease cap, that's part number 46749. The wheel stud size on this hub is a half inch by 20 and the four lug nuts it comes with are half inch by 20 cone style lug nuts.That should do it for the review on the Dexter complete hub and drum assembly for hydraulic brakes on 2,200 pound axles with the 4 on 4 inch bolt pattern.
