Buy Now!
New Engine Mount from 1AAuto.com [ Ссылка ]

This video shows you how to install a new engine mount on your 2012-2020 Ford Focus. A shaking or vibrating engine, or bucking when changing gears are signs of worn engine mounts.

This repair was done on a 2014 Ford Focus SE 2.0L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2012 Ford Focus
2013 Ford Focus
2014 Ford Focus
2015 Ford Focus
2016 Ford Focus
2017 Ford Focus
2018 Ford Focus

Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• 18mm Wrench
• 1/2 Inch Impact Socket Set [ Ссылка ]
• 1/2 Inch Impact Socket Set [ Ссылка ]
• 15mm Socket [ Ссылка ]
• 18mm Socket
• Locking Pliers [ Ссылка ]
• 1/2 Inch Impact Gun [ Ссылка ]
• E10 Socket
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• Floor Jack [ Ссылка ]

Subscribe: [ Ссылка ]

Check out our playlist:
Ford Focus 2012-2020 3rd Generation: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть