Tạo Điểm Thay Dao Cho Máy Tiện CNC (Custom Reference Position For CNC Lathe)
Khi bạn vận hành hoặc lập trình gia công cho máy tiện cnc (CNC lathe), mỗi lần thay dụng cụ cắt các bạn thường cho dụng cụ cắt về điểm X0. Z0. của máy (về chuẩn máy, Reference position, Machine Zero hay Home positon) bằng lệnh G28 U0.W0. Hoặc cho dụng cụ cắt di chuyển cách mặt phôi một khoảng an toàn đảm bảo tại đó, khi mâm dao thực hiên thay dao không có bất cứ va chạm nào xảy ra (G0 X_.Z_.). Nhưng có một vấn đề đặt ra rằng, hành trình trục Z của máy bạn quá dài trong khi chi tiết cần gia công lại ngắn, mỗi lần thay dụng cụ cắt lai mỗi lần phải về chuẩn máy làm lảng phí nhiều thời gian máy chạy không. Phôi cần gia công lại thường thay đổi kích thước, dụng cụ cắt của bạn cũng thường thay đổi dài ngắn khác nhau. Vậy di chuyển cách mặt phôi một khoảng như nêu trên có còn đủ an toàn trong mọi trường hợp. Trong đa phần máy tiện cnc hệ Fanuc, ta còn một vị trí tham chiếu thứ hai (Second reference position) mà vị trí điểm này được thiết lập trong thông số máy (Parameter). Nếu bạn am hiểu sâu về các thông số này bạn có thể thiết lập, sau đó dùng lệnh G30 để di chuyển dụng cắt về vị trí này khi cần thực hiện thay dụng cụ cắt. Nếu bạn không có nhiều kiến thức về tinh chỉnh thông số máy, bạn chưa từng thực hiện lệnh G30 bao giờ. Hãy thực hiện theo các bước hướng dẩn của tôi sau đây để thiết lập điểm thay dụng cụ trên máy tiện cnc mà không cần can thiệp vào thông số của máy. Tôi gọi điểm này là điểm thay dụng cụ, bởi mục đích tôi viết bài này là để hướng dẩn bạn tạo ra một vị trí mà tại điểm đó ta sẽ thay đổi dụng cụ cắt. Nếu dùng nó để ứng dụng trong trường hợp khác thì phải gọi là vị trí tham chiếu tùy chỉnh (Custom reference position) thì chính xác hơn.
Ещё видео!