How to change the oil in a Vespa Primavera 50cc.

00:00 Overview
00:04 Drain Cap Location
00:07 Removing drain cap with 24mm socket
00:13 Remove reusable oil filter
00:17 Drain all oil; have a second person tilt bike 45 degrees for best results
00:20 Clean reusable oil filter
00:40 Reinstall filter
00:50 Reinstall drain cap, torque to 4 ft-lb (48 in-lb, 5.4 n-m)
01:08 Remove fill cap
01:15 Add 0.89 its of 5W-40 4T Oil
01:33 Replace cap, run engine and check for leaks

Amazon Affiliate Links:
5W-40 4T [ Ссылка ]
24mm socket [ Ссылка ]

Other Links:
Oil filter (this is reusable but if you needed another) [ Ссылка ]

Disclaimer:
Due to factors beyond the control of Oliver Porter, I cannot guarantee against improper use or unauthorized modifications of this information. Oliver Porter assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Oliver Porter, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Oliver Porter.

свернуть