Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com [ Ссылка ]
This video shows you how to install new, quality TRQ brake pads and rotors on your 2003-2008 Toyota Corolla. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This repair was done on a 2008 Toyota Corolla S 1.8L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
Tools you will need:
• Pry Bar [ Ссылка ]
• 14mm Socket [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 21mm Socket
• 1/2 Inch Impact Gun [ Ссылка ]
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Anti-Seize Grease
• Brake Grease
• Brake Parts Cleaner
• Wire Brush [ Ссылка ]
Subscribe: [ Ссылка ]
Check out our playlist:
Toyota Corolla 9th Generation 2003-2008: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
