Getting C3 Corvette hoods, in general, properly aligned and adjusted, can be challenging. But with enough patience anything is possible.

And sometimes, good fortune can be on your side and make a huge, positive difference.

My 1976 Corvette's hood was poorly aligned, but after a couple of hours of tiny adjustments and a lucky break, it is now “somewhat” misaligned, and that's a good thing.

I am not an expert when it comes to Corvettes, but that does not keep me from trying to make my Vette better, and the hood alignment—or lack thereof—has always bothered me, especially after taking it off the car during the radiator swap.

The whole project got started with my plan to detail the underside of the hood a "little." That quickly became a restoration project of sorts involving sanding, glazing putty, more sanding, primer, and yes, wet sanding, followed by a few coats of underhood back paint.

But why stop there?

I ended up replacing the hood weatherstripping, removing the old, ratty-looking hood blanket and associated retainers, and installing a new hood insulator by FatMat.

That project is chronicled in a multi-part YouTube video series ➡️ [ Ссылка ] — Part 1.

Upon installation of the hood with its new-looking underside, the alignment issue regained importance which forced me to do something about it.

However, the fact that I work alone made the project almost too much to deal with. I would adjust one thing and one or two others would become misaligned. And this problem can grow exponentially if you're not careful.

But knowing what to adjust can make all the difference, and this allowed me to get the hood looking pretty darn good.

Luckily for those of you going through a similar situation, I filmed most of the steps I followed to get my hood aligned as straight and even as possible.

I am sure there are better ways to get the same or even better results, but if anything I hope my videos will steer you in the right direction.

Thank you for watching! 🙂👍🏻

======================================

CORVETTE PRODUCTS (sponsored)

- Hood Liner Blanket: [ Ссылка ]
- Hood Weatherstrip: [ Ссылка ]
- Weatherstrip Adhesive: [ Ссылка ]
- Semi-Gloss Black: [ Ссылка ]
- Sandpaper Assortment: [ Ссылка ]

- 68-82 Repair Manual: [ Ссылка ]
- How to Restore Your C3: [ Ссылка ]
- C3 Restoration Guide: [ Ссылка ]
- C3 Build & Modify: [ Ссылка ]
- Rebuild Corvette Chassis: [ Ссылка ]

======================================

DISCLAIMER: Even though I like to wrench on my Corvette and most of my videos are of a how-to nature, I am not responsible nor liable should you decide to follow my musings on the subject.

The repairs and other work I do are for my own benefit and entertainment, and even though my videos may sound and appear to give technical how-to advice, that's not my intention.

Working on a vehicle is inherently dangerous. If you're not confident, qualified, or lack the tools to do the job correctly and safely, hire a licensed mechanic.


#corvettec3 #c3 #c3corvette

свернуть