Buy Now!
New CV Axle Assembly from 1AAuto.com [ Ссылка ]

This video shows you how to install new front CV axle assemblies from TRQ on your 2011-2019 Ford Explorer. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.

This repair was done on a 2013 Ford Explorer Limited 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Ford Explorer
2012 Ford Explorer
2013 Ford Explorer
2014 Ford Explorer
2015 Ford Explorer
2016 Ford Explorer
2017 Ford Explorer
2018 Ford Explorer
2019 Ford Explorer

Tools you will need:
• Pry Bar [ Ссылка ]
• 19mm Socket
• 21mm Socket
• 32mm Socket [ Ссылка ]
• Trim Tool Set [ Ссылка ]
• 5/16 Inch Socket
• Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Brake Parts Cleaner
• Cloth Rags [ Ссылка ]
• Copper Anti-Seize
• Gloves [ Ссылка ]
• Safety Glasses
• Drain Pan
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Pole Jack
• Punch
• Ratchet Strap
• Rubber Mallet
• Wheel Chocks

Subscribe: [ Ссылка ]

Check out our playlist:
Ford Explorer 2011-2019 5th Generation: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть