Assembly instructions for my BMG E3D V6 Direct-Drive Mount for Ender 3.

Are you ready to push your Ender 3 to the next level?
Convert your Ender 3 / Ender 3 Pro / Ender 3 V2 or CR-10 to direct-drive by combining some of the best components available for 3D printing: the BondTech BMG extruder and the E3D V6 hotend.
This direct-drive mount is unlike any other. It was designed after trying a dozen other models and improved on the basis of this experience.
Don't be fooled by the simplicity of this direct-drive mount. As Albert Einstein might says: "Everything should be made as simple as possible, but no simpler”.

This direct drive makes no compromises and is designed with unique requirements:
* Specially optimized for the E3D V6 / BondTech BMG/ BLTouch / 5015 blower fan combo. Get trouble-free extrusion and perfect 1st layer each and every print. Goodbye clogging, goodbye under-extrusion, goodbye manual adjustment of the z-offset with a sheet of paper : Just print!
* Easy to install & maintain: high accessibility, no adjustments. Can be completely disassembled and reassembled in minutes, without having to readjust anything. Allow to reach the highest accuracy/repeatability. No need to periodically change the PTFE tube thanks to the all-metal hotend.
* Perfect retractions: Hotend connected directly to the extruder. The PTFE tube length is only 37mm! This results in more responsive extrusion, cleaner starts & stops and perfect retractions. Compatible with flexible filaments/TPU
* Optimized for Klipper: The high stiffness of the printhead results in less vibrations and allows high accelerations/decelerations
* Minimalist, compact & lightweight: Simple to print (only 3 parts, print support free), install and maintain.
* Highly efficient cooling: Reach high print speeds (up to 150 mm/s), get perfect bridges & overhangs

➡️ Additional information, instruction manual & firmware downloads (Klipper + Marlin)
[ Ссылка ]

➡️ Download 3D printed parts
[ Ссылка ]

➡️ Music: "Danger Snow" by Dan Henig (YouTube Studio Audio Library)

свернуть