Now this is an upgrade that really worth it , its fast . easy and Practical ..
the only downside is that it could not preheat the printer ( gcode file) before starting the print .
other than that its way way better to use it instead of Mainsail Ui.

klipper screen got alot of features and accessibility ... i think its a waste if u got klipper and u dont run klipper screen.

the design you see in the Vid is the MVP ... it was ment to keep it af frameless as possible .. i managed 0.8mm thicness tight fit ... it is also cooling way better with the quite 5v fan .

the magnet design is made to reduce printed parts and extra mechanism, and its made so you can place the screen where ever you want as long as the cabels allow you ... u can even place the screen ontop of the printer. it can stand alon in 3 different possitions .. and if you lay it flat the screws holding the excreen will give gap and will allow for air flow to reach the fan.

i placed maggnets in different places where i usually need the screen to be obvious ... inside the printr is where i need it when tuning , or when printing PLA with the door open.

if needed you can take the screen and the Pi out , change the SD card and allow the kids to use the Pi as they wish .

Thanks to BTT @bigtreetech5117 for providing Me with parts to make such Videos possible.
here is a link to the BTT Pi TFT50 and the BTT Pi :

[ Ссылка ]

[ Ссылка ]

🛠️ This is not your typical review; instead, we're diving into the challenges head-on, addressing each one from its unique perspective. The D3vil Design team is hard at work, pushing the boundaries to extract the maximum potential from this 3D printer.

🌐 Stay connected with us on Discord for more updates and to share your questions:
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]

Don't forget to like, subscribe, and hit the notification bell to stay in the loop on our 3D printing adventures! 🚀🔧 .

Sponsors links

Special Thanks to LDO for the continouse support @ldomotorsjason3488
[ Ссылка ]
----
Huge thanks for @triangle-lab6335 for helping me in the development and experements along the years
[ Ссылка ]
----
and to @bigtreetech5117 for sponsoring
[ Ссылка ]
----
My Original OT Hotend in collaboration with TriangleLab:
[ Ссылка ]
----
My Belts and Idlers ( In collaboration with Powge ) @POWGE_official :

The full Kit of belt and Idlers: ( K1 and K1 Max )
[ Ссылка ]

D3vil Belt alone
[ Ссылка ]

D3vil Idlers alone
[ Ссылка ]
------
NOTE: We are not sure if this will void your warranty or not, and we hold no responsibility if you choose to follow our tutorials, so do it at your own risk .

Thank you.

i dont think this Videos will ever be recomended or sponsored by @Creality3d

Music : Delinquent habits - Return Of The Tres

#creality #crealityk1 #k1 #3dprinting #tutorial #repair #fixed #3dprinters
#omranello #3dfuzz #3difinity #3d #nozzle #toolhead #disassembly #lubricants #graphite #bushing #service #3dfuss

свернуть