Our customers from UAE ordered the machine before our chinese new year and recently we test run of it according to the jars samples (one is with diameter 12.5cm the other 15.5cm) sent from our mideast buyer.
According to the requirements we resend the videos to our customer for getting a close check on the sealing effect.it seems good.Hope this time our dearly friend gets satified at it.
This machine can be customized to fill seal bottle automatically.
Recently our UAE customer feedback on the machine after using
the machine for more than 1year .
Every thing around the machine model YX-FS30 jars sealing is okay .They will place another order for three sets of jars sealing machines and build an agent office there for selling our machines
in Perian gulf regions.
parameter of sealing machine:
air pressure:0.8Mpa 0.1m3/min
power:3300W Voltage: 380V/3Phase/60hz
dimension:1650×550×1350mm
weight:185kg
sealing scope:Φ70-Φ150mm
sealing speed:1500-1800bot/h
sealing temperature:50-300temperature
Temperature form and deviation: Automatic constant temperature,
a deviation of ± 3 temperature
Maintenance and cleaning
1,Regulaly Clean the working side of heating panel to prevent the unevenness of working side of pressure head from affecting the sealing.
2,Regularly clean tooth blade to keep it sharp. The correct way of cleaning is to turn off power first and then to take down the film pressing frame by unscrewing the four screws on it. Finally do the cleaning with cloth and alcohol.
3,Oil the mechanical transmission parts regularly with lubricating oil. It there is obvious noise on any transmission part, disassemble the cover and oil the part where noise is found.
4,Oil the sliding chute every half month.
How to use the jars sealing machine
Use of Temperature controller.
Turn on the power switch, set the temperature of temperature controller to 160-200 degrees, (the temperature has been set before factory delivery. However, if the temperature is not enough, only slight adjustment is needed, but the temperature should never be too high). Preheating time is about 5-10 minutes and sealing can be proceeded when it reaches preset temperature.
Adjustment for the man-machine interface
When the interface is started, it displays “welcome to use automatic sealing machine”, then for the manual operation interface, each movement can be checked before officially starting operation, such as : Bottles IN, Bottles OUT, Bottles Clamping, Sealing, Film Rolling, on the interface right side is "parameter setting", if the parameters needed to be reset, directly touch click on the line of words and a small digital keyboard will pop out for you to set the required value, and press ENTER to save and exit, the machine’s factory default setting of sealing time of is 0.7S, film rolling length is 5 PM, the others are 0.
Use of Film Roll Counter
The Film Counting Meter is the controller for the length of the film roll. When it is to be operated by the user-machine interface, notices should be given that the film roll must be assembled stable and well, with rubber wheels pressing on the film roll, before any operation.
For more information about the various machines filling packing equipments like model YX-FS30 automatic linear jars sealing machine heating PE film sealer equipment Gläser Verschließmaschine from our superb cosmetic machinery factory,plz browse our another website business video [ Ссылка ] as well as follow PENGLAI INDUSTRIAL CORP business website [ Ссылка ]

свернуть