✌️✌️✌️TOP NOTCH GOOGLE PIXEL 7 PRO UV LOCA FULLY CLEAR TEMPERED GLASS
Exclusive Google Pixel 7 Pro Turbo Smooth Clear Tempered Glass
CaseFriendly and Super Responsive.

🤝Pretty simple to apply as long you catch the correct technique.
• Place a cloth under your phone. Clean the screen with a clean cloth after use dust absorber to remove unwanted particles from the screen. Place something thicker at the bottom of the phone to level the screen straight.
• Drip one full bottle of UV glue at the middle of the screen. If you see the UV glue is moving mean your screen not level straight shift it slightly to make sure the UV glue stay in place at the middle of the screen.
• Now peel off the bottom sheet of clear plastic from the tempered glass. On your screen first and align carefully before contacting the UV glue. Once done slowly let the tempered glass and UV glue contacted and let it slowly flow to both end.
• Do not remove your hand yet let it slowly spread nearly to the edges than you release your hand. Should you encounter any rainbow effects at the edges dun worries let it settle down for few minutes and it should be gone.
• Now is the wet wipes to clean the edges lightly remember dun knock onto the tempered glass or Uv glue. Just clean slowly if any UV glue had overflow.
• Prepare your UV lamp now and start to cure it above the tempered glass first. Carefully do not let your wire or lamp hit or shift your tempered or else it will be in a mess.
• Move the UV lamp above up’s and downs for about 20times. After you can leave the UV lamp standing from top to middle to bottom for about 10mins each to solidify the UV glue.
• Once done you can now go to setting and switch on your touch sensitivity for screen protector and start to register your fingerprints. Wonderful. Instantly and Turbo smooth surface tempered glass.

Note:
* Try to find a place which is clean and no wind nor fan around blowing during applying.
* Why is there no hole for front camera because a lot customers experience UV Glue doesn’t spread nicely around the hole and causes blocking the camera by harden UV Glue or trap dust easily which lead to be very awful and unusable.
* Place a cloth under your phone would be bêtter incase your table surface is rough which might scratch your phone.

Alternatively you may TELEGRAM ‘ Mobilelite ‘ for more information.

Videoby: Sony Xperia Pro I

#googlepixel #pixel7pro #TeamPixel #googlepixel7pro

Shop Now @
Shopee: [ Ссылка ]
Lazada: [ Ссылка ]
Qoo10: [ Ссылка ]

Remember to subscribe to our channel.
Should you have any questions do leave us a message in the comments box below ⬇️ thank you.

свернуть