Click for more info and reviews of this Blaylock Industries Trailer Tongue Lock:
[ Ссылка ]
Check out some similar Trailer Tongue Lock options:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]
Full transcript: [ Ссылка ]
Today were going to review part number BLTL-38. This is the Blaylock Easy Lock Coupler Lock for 1 7/8-inch and 2-inch light duty couplers. This coupler lock will prevent theft of your trailer that has a ball coupler that uses a flat or rolled lip on it. To give you an idea of a coupler like that I have an example here. This is a Fulton straight-tongue coupler. Its a 2-inch hitch ball coupler, and if you notice it has the lip on the outer edge here so basically what this lock would do this lock will fit over the couplers lip right here, and when you put it over there it fully surrounds the hitch ball coupler to block access to the hitch ball opening.
This 5/8-inch diameter steel pin will slide up into the hitch ball opening and then with that up there you just push the lock closed and it would lock the pin into place. Thatll prevent removal of the lock. Thatll secure it to the coupler. The lock right here is located on the front of the unit so its easy access. The recessed tumbler on the inside will provide extra security.
Now this lock does have a keyed alike option. When you order this you can select keyed alike and you can order multiples of this lock with the same key or you can have it keyed to the same other Blaylock push button style locks you might have. This lock is made of an aircraft grade lightweight aluminum which is strong and resists wear and corrosion. These two keys are included. The part is made in the USA.
To unlock it you just put in in there and turn it and youll see the pin drops out and you can just slide it off the lip of the coupler. Again this application will fit 1 7/8-inch and 2-inch light duty couplers. Now the maximum coupler width, in other words the complete overall width that this will fit onto is going to be 3 , and basically we say that because if we measure the opening in this is going to be 3 so nothing wider, your coupler cannot be any wider than that 3 inches. The weight of this lock is about two pounds. That should do it for the review on part number BLTL-38, the Blaylock Easy Lock Coupler Lock for 1 7/8-inch and 2-inch light duty couplers..
