FC TOPCUT2016
SELF-WEEDING TRANSFER PAPER FOR LETTERING AND DESIGNS ON LIGHT COLORED FABRICS
SUITABLE FOR COLOR LASER PRINTERS AND COPIERS
Decorate a white T-shirt WITHOUT LEAVING BACKGROUNDS
The box contains:
instructions
1 white polyester cloth
2 sheets of heat resistant tissue paper AU CFC VELIN
10 sheets of AU CFC POLSIL plastified silicon paper
100 printable sheets
Insert a sheet of FC TOPCUT2016 in the laser printer. Pay attention to the printing side.
TOPCUT2016 is ideal for full color images and without gradients or shades.
This image was made with strong colors.
The slight gradient on the bottom shows the transfer's performance on images with shades.
Set the printer to extra heavy paper (121-188 gr/m2). Printed in mirror mode with an OKI CMYK printer.
Pre-heat the press to 175°C (only for the first t-shirt)
Place the t-shirt on the press
Place the transfer paper
Protect with 1 layer of white polyester cloth included in the packet
Press at 175°C for 20-25" with medium-high pressure
Remove the polyester cloth
Wait 5" and peel off the transfer's liner
Only the portions with toner will be transferred
Place a sheet of AU CFC POLSIL, plastified silicon paper on the image, with the glossy side facing the graphics
Press at 175°C for 35" with very high pressure. Important for washing resistance.
Remove the plastified silicon paper
Full color graphics will be perfectly outlined
The very light shaded colored parts remain on the paper
For best results in case of light colors use the TOPWEED “topcolor6410” color palette (no cut technology) supplied with the CMYK printer or the TOPWEED transfer.
The colors for the graphics can be chosen from the “topcolor6410” color palette
A large range of colors are available and results are ALWAYS perfect!
Printed on an OKI CMYK printer in mirror mode
Pre-heat the press at 175°C (only for the first t-shirt)
Place the t-shirt on the press
Place the transfer paper
Protect with 1 layer of white polyester cloth included in the packet
Press at 175°C for 20-25" with medium-high pressure
Remove the polyester cloth
Wait 5" and peel off the transfer's liner
Only the portions with toner will be transferred
Place a sheet of AU CFC POLSIL, plastified silicon paper on the image
With the glossy side facing the graphics
Press at 175°C for 35" with very high pressure. Important for best washing resistance.
Remove the plastified silicon paper
Full color graphics will be perfectly outlined
All colors, including the lightest will be perfect!
Topweed, all self weeding colors in a single click!
