There was some loose aperture blades In this AF-s Nikkor 35mm 1:1.8 G ED DX, because the lens has been dropped on the floor.
It's not a "complicated" lens to work with, just take good care to not break the plastic parts, and remember to set the focus to Infinity before taking out the back lens assemblt with the focus helicoid, it's all made of plastic.
And TAKE CARE of the flex cable from the contact bridge on the bajonet.
Here are some link's to different repair tool's:
Japan Hobby Tool rubber cone:
[ Ссылка ]
18 different size rubber repair tool's:
[ Ссылка ]
You can also buy this set.
Lens Repair Set with pointed, flat, half flat tips:
[ Ссылка ]
JIS cross head screw driver's:
[ Ссылка ]
Or this set, that is the set I use:
[ Ссылка ]
Lens cleaning wipes (PEC-PAD):
[ Ссылка ]
Thin Cotton Buds x 200 you can buy them here:
[ Ссылка ]
DSLRKIT Pro Lens Vise Tool Repair Filter Ring Ajustment Steel 27mm to 130mm:
[ Ссылка ]
Japan Hobby Tool Helical Grease Made in Japan:
[ Ссылка ]
Loctite 222 50ml Threadlocker
[ Ссылка ]
