First
Pulsator screw, may be damage, spin cant rotation, and make noise
Open pulsator insde tube, and check screw.
if screw eroded, replace pulsator unit
I dont have this problem

Second
Tension belt motor to gearbox, may be weak.
I get this problem, spin motor slow, pulsator rotation slow too.
Solution, Slide the motor so that the belt is pulled back
Replace with a new belt M22

Third
Slow spin, relation with bad capacitor
Cable not connect to capacitor and main power
Please check the capacitor connection
Discharge the capacitor, and test with multimeter
Check value capacitor on multimeter and cap label

00:00 Drum washing machine slow spin
00:30 Why drum not fast spin
There are several reasons why a washing machine may not spin properly or fast
00:53 Check tension V belt washing machine
01:14 Adjust Motor position
01:42 Check tension before
Not to tight the bold motor
01:53 Tight the bolts mounting
May me you need check
If tension very tight, you can hear stranger sound from belt
If proper instal tension belt, sound washing machine will smooth
02:00 Wrong install tension, very tight
Take it for a Test Spin
02:30 Proper belt tension
Finally, throw in a few hand towels or t-shirts and set the washer on a light cycle. If it spins and doesn’t show any other signs of problems

Beware
Always unplug power, before open your washing machine

Motor washing machine about 680 rpm
Higher spin speeds helps in faster drying
Why is my washing machine spinning slowly
Usually after 5 years usage, need adjust belt tension
Or replace with new belt washing machine

How do I fix the spin cycle on my Samsung washer
There are several reasons which may explain why the spin performance of your washing machine does not complete as expected.

One of them problem - Drive Belt, V-belt or Van Belt.
It connects the motor pulley to the drive pulley so the inner tub can spin.
May be tension belt weak.
Not enough transmission power from motor to drum pulley.

Look in the access panel to locate the belt.
Search inside of the washing machine rubber belt stretched between the motor and the drum.
A top-loading machine has the belts near the bottom of the drum.
Sorry we dont have a front loader machine

New Belt
Don’t try to loop the belt around the motor pulley yet since it will most likely be too tight to position correctly.
Buy the same model v belt replacement

Signs The Belt In Your Washer Is Bad
When the belt in your washer begins to wear down, it may slip occasionally. This can create a squealing noise that gets louder as the belt breaks down over time. You might also smell burning rubber. It's a good idea to call for repairs when your washer starts making squealing noises during the wash and spin cycle because the problem just gets worse until the belt breaks. The basket in your washer may also spin erratically or it may stop spinning altogether once the belt breaks. When the belt has broken, the washer will fill with water and function normally except the basket won't spin.

Adjust belt tension (old belt)
Pull motor, make proper tension, but dont to tight.

Always be sure you know what you’re looking at.
The belt will be a wide black rubber strip looped around a pair of gears that turn the washing machine drum.
Example my washing machine is Samsung.
Using 22m model, never replace a belt about 7 years.

If you have DIY skills, you may be able to replace the belt yourself if you can find the right part.
It's a matter of taking out the old one and putting in the new belt.
If you don't feel comfortable changing the belt or checking if it is bad, call a repair person so you stay safe and so you don't do anything to damage to your washer.

By calling an expert, you won't even have to worry about identifying the correct part and finding a replacement belt.
Also, one benefit of calling in someone with experience in washer repair is that the source of the problem can be identified with certainty.
Other parts can malfunction and cause problems with your washer and you may waste time changing the belt when the washer has a more serious malfunction

свернуть