This speedy DIY shows how to remove the front bumper cover from an Audi A4 B7. Before the bumper cover is re-installed, inspect the systems contained in the cover plus the forward facing components on the vehicle.

Bumper steps:
1. Remove 3 T30 Torx screws with washers holding the top of the cover to the lock carrier 00:06
2. Remove 6 T25 Torx screws and 1 plug from both front fender liners 00:20
3. Pull back fender liners from the front of the wheel wells 00:34
4. Remove 2 T25 Torx screws holding the bottom of the bumper to multi-purpose brackets
5. Remove 2 10mm nuts which hold the top of the bumper to the fender 00:43
6. Pull lower corners of bumper cover outwards to detach their clips from the bottom of each fender 01:03
7. Pull the entire bumper straight away from the front of the vehicle, supporting it's weight
8. Unplug fog light and/or Homelink connectors from drivers side 01:23
Success!

+ Grille steps:
9. Remove 9 T20 Torx screws from the back of the grille to release it from the bumper cover 02:02

свернуть