Product details of PowMr PZEM AC 6in1 220V 100A Single Phase Digital Ampermeter Power Energy Voltmeter Ammeter Volt Watt Kwh Factor Meter Split CT pzem-022
1. Electrical parameter measurement function(voltage, current, active power, energy, frequency, power factor)
2. Overload alarm function (over power alarm threshold, backlight and power flashing to alarm).
3. Power alarm threshold preset function (can set power alarm threshold).
4. The energycan be reset use thekey.
5. Store data when power off.
6. Large-screen LCD
7. Backlight function.
PowMr PZEM AC 6in1 220V 100A Single Phase Digital Ampermeter Power Energy Voltmeter Ammeter Volt Watt Kwh Factor Meter Split CT pzem-022
1.Power: test range: 0~22000W,Startingmeasure power:0.2W
＜10Wdisplay format:1.00~9.99W
＜100Wdisplay format:10.0~99.9W
＜1000Wdisplay format:100~999W
＜10000Wdisplay format:1.00~9.90kW
≥10000Wdisplay format: 10.0~22.0kW
2.Energy: test range: 0~999kWh
＜1kWhdisplay format:0~999Wh
＜10kWhdisplay format:1.00~9.99kWh
≥10kWhdisplay format: 10~999kWh
3.Voltage: test range: 80~260V
Display format: 80~260V
4.Current: test range: 0~100A,Starting measure current:0.001A
＜10Adisplay format:0.000~9.000A
≥10Adisplay format:10.00~99.99A
5.Frequency: test range: 45~65Hz
Display format:45~65Hz
6.Power factor: test range: 0~1PF
Display format:0.00~1.00PF
III. Key
1.Backlight control
Short press the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off.
2. Reset energy
Step1: Long press the key for 5 seconds until the energyvalueflash, then release the key.
Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state.
Step3:Ifthere is no operation on the key within 5 seconds,it means the energy value is not cleared and will exit the reset state.
3.Set power alarm threshold
Step1: Long press the key until the LCD screen display“SET CLr”, then release the key to enter the setting state
Step2: Power window display the current power alarm value and the last digit begin to flash, then you can short press to plus 1, when there is no operating over 3 seconds, it will switch the digit position automatically, the setting method is as same as the above.
Step3: After finish the setting, long press the key over 5 seconds will store automatically and exit, the rangeof active power threshold is 0.0～2.5kW.
C. Precautions
1. This module is suitable for indoor, please do not use outdoor.
2. Applied load should not exceed the rated power.
3. Wiring order can’t be wrong.
D. Specification parameters
1. Working voltage: 80 ~ 260VAC
2. Test voltage: 80 ~ 260VAC
3. Rated power:100A/22000W
4. Operating frequency: 45-65Hz
5. Measurement accuracy: 1.0 grade
---
Link of seller shop, please click here:
[ Ссылка ]
Disclaimer: I am not connected to the seller. Just sharing my experience buying their product.
PowMr PZEM AC 6in1 220V 100A Single Phase Digital Ampermeter Power Energy Voltmeter Ammeter Volt Watt Kwh Factor Meter Split CT pzem-022
RELATED TAGS:
peacefair pzem-022
peacefair
pzem-022
powmr
pzem022
digital ammeter
power factor meter
voltmeter
energy meter
ammeter
dc voltage indicator
battery level indicator
battery capacity indicator
digital voltmeter
battery voltmeter
voltmeter
power output meter
ac multimeter
ac meter
multimeter
wiring
install
set up
setup
how to install
how to connect
how to
solar off grid
solar off-grid
solar circuit
solar setup
solar set-up
solar energy
solar
solar grid tie
best buy
budget
unboxing
shopee
lazada
shopeeph
lazadaph
------
Track: Diviners - Stockholm Lights [NCS Release]
Music provided by NoCopyrightSounds.
Watch: [ Ссылка ]
Free Download / Stream: [ Ссылка ]
------
#JackOfallPinoyWoody #solar #solaroffgrid
