0:00 Introduction
0:19 Pedal Features
2:05 Installation
12:57 Wrap up

[ Ссылка ]

Clean Speed rear brake pedal for the KTM, Husqvarna and Gas Gas 450, 500 and 501 dirt bikes 2017-present.

Our pedal is machined from billet aluminum opposed to porous cast, and has a significantly larger cross-section in the areas where the stock pedal has proven to be weak.
We have incorporated the Fasst Company Return Spring to deal with the OEM springs that are known to break and put the return spring in a protected area. This also gives the pedal a much cleaner look.
We use blind mounting holes for the pedal pad screws that yield a 'C' shaped cross-section which is much stronger than two parallel walls left from the through holes used on most pedals.
We invested the extra machining time to retain the OEM angle mount tip design that reduces the frontal-area of the pedal and make it less of a target for roots and rocks. It also provides more clearance between the pedal tip and clutch cover.
Our pedal also includes a brake-snake hole under the pedal pad area for added protection.
All of our products are made with pride in Arizona, USA.

свернуть