A video tutorial on how to program a smart key remote fob to a 2015 - 2016 Chevrolet Suburban.
More free DIY programming instructions available at [ Ссылка ]
*This will only apply to Chevy Suburban's that have a push button start ignition.
A new transmitter can be programmed to the vehicle when there is one recognized transmitter. To program, the vehicle must be off and all transmitters, both currently recognized and new, must be with you.
1. Remove the key from the recognized transmitter.
2. Place the recognized transmitter(s) in the cupholder or passenger seat.
3. Insert the vehicle key into the key lock cylinder on the driver door handle. Then turn the key counterclockwise, to the unlock position, five times within 10 seconds. The Driver Information Center (DIC) displays READY FOR REMOTE#2, 3, 4, ETC.
4. Place the new transmitter in the transmitter pocket/insert. Open the center console storage area and the storage tray. The transmitter pocket/insert is in front of the storage area next to the center console storage area between the driver and front passenger seats.
5. Press the ENGINE START/STOP button. When the transmitter is learned, the DIC display will show that it is ready to program the next transmitter.
6. Remove the transmitter from the transmitter pocket and press unlock or lock on the transmitter. To program additional transmitters, repeat Steps 4–6. When all additional transmitters are programmed, press and hold the ENGINE START/STOP button for approximately 12 seconds to exit programming mode.
This how-to video tutorial will show you how to program a smart key remote fob to following Chevrolet Suburban models:
2015 Chevy Chevrolet Suburban (LS, LT and LTZ)
2016 Chevy Chevrolet Suburban (LS, LT and LTZ)
Find a Locksmith in your area with [ Ссылка ]
Ещё видео!