Tools required: screwdriver, putty knife, safety goggles, gloves.
We are going to show you how to properly remove and re-install the screen on a sliding glass door. To remove the door screen, you will need to take the screen off the rollers.
Find the screws at the bottom of either side of the screen. Turn this screw clockwise to raise the screen up, and turn it counter clockwise to bring it down. The screen will start to drop, continue until you see the head of the screw. Repeat this procedure on the other side. The wheel will now be in the upright position.
Next, raise the screen and locate the wheels. The wheels are located at either end of the screen. Place the putty knife under the wheel, push in and lift. Once the wheel is up, gently slide the screen towards you.
To re-install the screen, line up the top two wheels back inside the track and push up the screen as high as it will go. Hold the screen out slightly and line up the putty knife with the wheel and slide the screen back into the track. Perform the same action on the other side. Before you operate the screen, it must be adjusted. Using the screwdriver, turn the screw clockwise until you see the screen rise. Repeat the same procedure on the other side.
Check to make sure the screen operates smoothly.
